Safety knowledge that should be paid attention to when operating the wire binding machine
Wire tying machine is a heavy machine. If improper operation will cause you injury or some failure, then let's talk about the safety knowledge that must be paid attention to when operating the wire tying machine.
Accident 1. As the operator of the wire binding machine dozed off at work, the left hand pressed the lead and accidentally touched the movement of the tied needle, causing his left middle finger to be pierced by the tied needle and sent to the hospital where three stitches were sewn.
Accident 2. When the operator of the wire binding machine is working, because the motor protector of the machine is tilted and then lifted by hand, the needle of the wire binding machine is poked in the hand.
Accident 3. When the operator tied the thread of the machine, the finger entered the movement range of the needle binding, and the right hand side was broken.
The above three accidents are caused by the operator not paying attention to the safety knowledge of the operation of the wire binding machine. So what safety knowledge do you need to know when operating the wire binding machine?
1. Make sure the grating and other protective covers are correct and effective before operating the wire binding machine.
2. It is forbidden to use yarn gloves to operate the machine.
3. If the protective cover of the machine is lifted or there are other faults and cannot be supported by hand, be sure to use a tool to press.
4. Also, you must not operate the wire binding machine when you are sleepy or tired. If you are sleepy, you can take a break after the operation.
Online service